HOME         |         ABOUT US          |         PRODUCTS         |         CONTACT US         |     MARKET COMMENTARY 
 
 
 

PRODUCTS

OUR PRODUCTS

Sioux Steel Company

 

- Grain Bins

- Hoop Buildings

- Livestock Equipment

Delux Grain Dryers

Grain Handlers

Arts-Way Manufacturing

Meridian Manufacturing

Channel Seed

Big Gain Feed

Ralco Nutrition

Spread-All Manufacturing

Sundenga Industries

Miraco

Shurco Tarping Systems

Gallagher Fencing

Sukup Manufacturing

Baldor Motors

Kent Feed

Artsway MFG.

Art’s Way Manufacturing Co., Inc. is a leading manufacturer of specialized agricultural equipment for the farming and livestock industries. Our product line includes grinder mixers, hay and forage equipment, sugar beet harvesters, land and soil grading equipment, grain processing systems, and other farm machinery. Since 1956, the Art’s Way brand has been synonymous with innovation, quality and dependability – three traditions on which our company was built, and for which our products still stand today.

At Art’s Way, our employees work hard to provide outstanding service and support to our customers, from our central office staff to our Sales Representatives located across the U.S. and Canada. We offer superior equipment designed to meet the diverse needs of the farmer and rancher and knowledgeable employees.

Innovation you can count on, that’s Art’s Way.

6530 Grinder Mixer   We have new and used.  Call us for parts!

Quick Specs..
165 bu. Tank
26" Hammer Mill
10" Diameter Discharge System
Self Contained Hydraulics
Wireless Remote Operation
Hammers - 96 Hardened, 4-Way Reversible
540 or 1000 RPM

A blend of tradition, quality and exceptional performance

It's not just the largest in the industry, it is also the best and most productive grinder on the market today. The portable 6530 grinder mixer from Art's Way features a gigantic 165-bushel tank with a one-piece 26 inch hammermill. This 4 ton mixer is easily configured to meet the needs of your specific livestock operations and includes a multitude of new ideas and improvements that originated from the experience of owners of previous models.

Faster unloading

The 10-inch diameter unload system has increased the discharge rate by up to 50% to drastically reduce time and labor costs. All unload discharge augers are run by hydraulic orbit motors.

Bigger, better discharge

Move more feed faster, with bigger, better discharge capabilities-increased gate opening, longer 12 ft. discharge auger tube and additional 60 height setting on discharge auger tube cylinder.

Large 36 gallon hydraulic tank

Dissipates heat, decreasing fluid temperatures which maximizes tractor HP. Sight glass level and temperature gauge provides visual indication of oil levels and temperature.

Consolidated hydraulic valve bank with soft start

Provides smooth operation and easy hydraulic adjustments in one place. Pressure gauges for better monitoring/control of hydraulics.

Smooth operating drive system

Spring loaded chain tensioner with idle master idler on double 60# chain drive provides uniform tension and smooth operation.


 

 

Grader  We have one in inventory.  Come look--nice!

 

Quick Specs...

9', 12' and 14' Models
45 Degree Angel
15 Degree Tilt
30" Blade Height
15" Ground Clearance
Replaceable High Carbon Steel Cutting Edge

 

With an Art's Way pull type grader, you and your tractor can quickly and easily maintain terraces and waterways, level ground and headlands, clean out feedlots, rebuild ponds, grade roads, clean ditches, remove snow, maintain levees, dig irrigation ditches, clean away trash, gather up brush and do so much more. An Art's Way grader is the ultimate multifunctional farming tool, available in 9-foot, 12-foot and 14-foot models to meet your individual needs. Once you have one, you'll wonder how you lived without it!


 

 

 

 

Rolling Hoppers Augers

We have in inventory 12"x72', 10"x72', 10"x62' augers.

Quick Specs...

Models available:

10" - 62' & 72' Augers with Rolling Hopper, 12" - 72', 82', 92', & 122' Augers with Rolling Hoppers
 

 Art’s Way Manufacturing Inc. has established a portable grain auger manufacturing plant in Salem, SD. Models for this first year of production include two sizes of driveline augers and five sizes of augers with rolling hoppers.

All models are available painted white or hot dipped galvanized. Hot dip galvanizing is a unique process in the auger industry. Art’s Way welds the auger tube with all brackets in bare steel. The welded tube is then sent to a state-of-the-art galvanizing facility where the entire tube is cleaned, prepared and finally galvanized. This process provides a “self-healing” coating 3 to 10 mils thick.

All Augers with Rolling Hoppers are constructed from 12 ga. tube and ¼” flighting. They are double flighted in high wear areas in the hopper and drive section. These augers feature internal drive with externally mounted gear boxes for proper venting and easier maintenance. The CV power shaft with shear clutch provides a smooth drive and overload protection.

The 10” Auger with Rolling Hopper is raised with a hydraulically driven worm winch lift. The 12” Auger with Rolling Hopper is raised with a hydraulic cylinder lift. The discharge spout features a standard relief door.

About the Rolling Hopper – This low profile hopper has an adjustable clearance height of 10-3/4”, 12-1/4” and 13-3/4”. The hopper opening on 10” models is 60”Lx32”W; it is 60”Lx48”W on 12” models. It may be operated and transported on the right or left side of the auger. It features a mechanically driven internal drive with pneumatic tires and rubber flex extension. A Power Wheel kit for lateral movement of the hopper is available for the 12” hopper.

A 3’ flex spout is available for both the 10” and 12” Augers.

With 52 years in the farm machinery manufacturing business, you can expect Art’s Way to become a leader in the auger industry.
 


 

 


 

 

 

Top Drive Augers

 We have 10-34's, 8-66 in stock.

 

Quick Specs...

Models available: 8" & 10"-34 Top Drive Augers


 Art’s Way Manufacturing Inc. has established a portable grain auger manufacturing plant in Salem, SD. Models for this first year of production include two sizes of driveline augers and five sizes of augers with rolling hoppers.

All models are available painted white or hot dipped galvanized. Hot dip galvanizing is a unique process in the auger industry. Art’s Way welds the auger tube with all brackets in bare steel. The welded tube is then sent to a state-of-the-art galvanizing facility where the entire tube is cleaned, prepared and finally galvanized. This process provides a “self-healing” coating 3 to 10 mils thick.

8” and 10”-34’ Driveline Augers are offered with PTO or electric drive and are constructed of 12 ga. tube. The 8” auger has 7 ga. flighting and the 10” auger has ¼” flighting. These heavy duty augers have a reversible gear box which permits PTO operation from either side. The sealed head assembly is grease packed at the factory and enclosed for continuous lubrication and weather proofing. Four bearings in the head cap carry the load. The discharge spout features a standard relief door. The guarded intake cage sports a removable clevis tow hitch. One pin removes the tow hitch for use in hoppers and cramped areas. The auger is raised and lowered with a hand crank winch.

All Augers with Rolling Hoppers are constructed from 12 ga. tube and ¼” flighting. They are double flighted in high wear areas in the hopper and drive section. These augers feature internal drive with externally mounted gear boxes for proper venting and easier maintenance. The CV power shaft with shear clutch provides a smooth drive and overload protection.

The 10” Auger with Rolling Hopper is raised with a hydraulically driven worm winch lift. The 12” Auger with Rolling Hopper is raised with a hydraulic cylinder lift. The discharge spout features a standard relief door.

About the Rolling Hopper – This low profile hopper has an adjustable clearance height of 10-3/4”, 12-1/4” and 13-3/4”. The hopper opening on 10” models is 60”Lx32”W; it is 60”Lx48”W on 12” models. It may be operated and transported on the right or left side of the auger. It features a mechanically driven internal drive with pneumatic tires and rubber flex extension. A Power Wheel kit for lateral movement of the hopper is available for the 12” hopper.

A 3’ flex spout is available for both the 10” and 12” Augers.

 
 


ALL ART'S-WAY PRODUCTS



 

Portable Grain Augers


 

 

Crop growing - soil prep and planting

Plows

» Plows


 

 

Land Management

Graders

» Graders


 

 

 

 


 

 

 
Copyright © Renze Feed 2010 | Website Design By: Websites to Impress